Description
Application
1. Engineered Resin Stone
2. Polished Quartz Tile
3. Marble with less calcium carbonate (such as green marble)
4. Multi-stone block floor
Suggestion: If the area to be polished is all marble with no granite, please directly purchase “XShine Marble Polishing Powder “to achieve the best brightness.
Package and Coverage
1. 300g: approx. 9 m2
2. 1kg: approx. 30 m2
How to Use
【On Polished Quartz Tile, Multi-Stone Block Floor】
** If there is color stain or damage on the surface, please grind it with a diamond pad first. The starting grit of pad should be determined according to the degree of damage, and the surface should be ground finally with #3000 pad.
1. Dust an appropriate amount of polishing powder on the area to be polished, and add a little water. The ratio of water to polishing powder should be about 1:1, and the polishing liquid should be thick when polishing.
2. Use a 17-inch stone polisher with 175 RPM speed or a variable speed hand polisher with lowest speed 1000-rpm, attach the white scouring pad to the Velcro drive disc. Turn on the power to start polishing.
3. Keep the polishing liquid thick and milky during polishing. If it is too thick, add some water as appropriate; if it is too thin, add some powder as appropriate.
4. During the polishing process, the polishing liquid can be scraped off at any time to observe the brightness of the surface. If the brightness does not meet the requirements, increase the polishing time.
5. After polishing, wipe off excess polishing powder. Then with clean water, use the polisher with another clean white scouring pad to clean the surface. Finally, wipe the surface dry.
6. If you want the surface to be waterproof, anti-stain, and brighter, please use “Crystal Polishing Cream “after polishing with polishing powder.
【On Engineered Resin Stone】
** If there is color stain or damage on the surface, please grind it with a engineered resin stone abrasive pad first. The starting type of grinding pad should be determined according to the degree of damage, and the surface should be ground finally with #6 grinding pad. After that, use this polishing powder to polish.
1. Dust an appropriate amount of polishing powder on the surface to be polished.
2. Spray a small amount of water on the polishing powder, and then blend the polishing powder and water with a white scouring pad until the polishing liquid becomes thick.
3. Use a variable speed hand polisher with lowest speed 1000-rpm, attach the white scouring pad to the Velcro drive disc. Turn on the power to start polishing.
4. When polishing, keep the polishing liquid thick and milky and polish it for a period of time (about 30 seconds or more), and then slowly polish it until the it is slightly dry. After that, spray a little water again and still polish it until it is slightly dry. Repeat this process for 2~3 times, and during the last polishing, polish it until it is completely dry.
5. During the polishing process, the polishing liquid can be scraped off at any time to observe the brightness of the surface. If the brightness does not meet the requirements, increase the polishing time.
6. After polishing, wipe off excess polishing liquid on the surface with a wet cloth.
7. If you want the surface to be water-repellent and brighter, please use “Carnauba Wax “after polishing with polishing powder.
Product Features
1. High quality polishing powder
2. Powder Color: White
3. pH Value: 7
Cautions
1. Please wear rubber gloves and a mask when using the polishing powder. When dusting the polishing powder, please avoid excessive movement that may cause the powder to fly.
2. Keep out of reach of children. Polishing powder must not be swallowed. Please avoid the polishing powder to contact with eyes. If it contacts with eyes, please rinse the eyes with plenty of water and if necessary, seek medical treatment as soon as possible.
3. Before use, please test it in an inconspicuous area. If you have any questions during the test, please contact us for discussion.
