Description
Application
Restoration,polishing, and beauty care of natural bright marble. It can handle acid corrosion and fogging, heavy limescale, minor scratches, and low brightness.
Set Contents
1. PE-926VS polisher: 1
- Attached with a 3-inch or 4-inch Velcro drive disc, according to the size of the diamond pad you choose
* For the specifications of the polisher, please refer to the product picture. *
* The power supply is single-phase 110V / 60Hz. We also provide a single-phase 220V / 50Hz type. If there is such a need, please contact us first.*
2. Diamond pad grit #500, #1000, #2000: 1 for each girt (3-inch or 4-inch).
3. White polishing scouring pad: 2 (3.5-inch or 4-inch white scouring pad in accordance with the size of the diamond pad)
4. XShine marble polishing powder: 1 (350g or 1kg)
* Estimation on marble polishing powder working area
- 350g：around 16 m2
- 1kg：around 49 m2
5. PE-926VS splash guard: 1
How To Use
＊Below is a simple description, and a detailed manual and video for use will be included in the set.*
【Preparations Before Work】
1. Protect the areas that do not need to be ground and polished against splashes (it is recommended to use pre-taped masking film).
2. Install the Velcro drive disc on the tooth shaft of the polisher, and turn the polisher’s speed knob to “1” to start.
【Work Flow】
1. Grinding for stain/scratch removal - wet grinding with #500 diamond pad
(1) Add water for wet grinding. During the wet grinding process, please keep enough water in case of dry grinding. During the grinding process, if gray slurry is ground out, the operation is right. When there is gray slurry, grind a little longer.
(2) After grinding, please clean the stone surface,and wait until it is completely dry, and then observe whether the stains or scratches are completely removed. If there are still stains or scratches,please add water to grind again, and repeat this step until they are completely removed.
＊ After grinding with #500 diamond pad, the surface will not be bright, and it looks foggy white.
2. Medium-fine grinding - wet grinding with #1000 diamond pad
(1) Add water for wet grinding. During the grinding process, if gray slurry is ground out, the operation is right. When there is gray slurry, grind a little longer. The color of the slurry will be a little lighter than that of #500 diamond pad.
(2) The grinding range should cover all the areas that#500 diamond pad has ground.
(3) After grinding, please clean the stone surface,and wait until it is completely dry, and then observe whether the grinding marks of #500 diamond pad are completely removed. If there are still areas that have not been ground, please add water to grind again, and repeat this step until the grinding marks of #500 are completely removed.
＊ After grinding with #1000 diamond pad, the surface feels finer than that of #500, but it is still foggy white and not bright.
3. Fine grinding - wet grinding with #2000 diamond pad
(1) Add water for wet grinding. During the grinding process, if gray slurry is ground out, the operation is right. When there is gray slurry, grind a little longer.
(2) The grinding range should cover all the areas that#1000 diamond pad has ground.
(3) After grinding, please clean the stone surface,and wait until it is completely dry, and then observe whether the grinding marks of #1000 diamond pad are completely removed. If there are still areas that have not been ground, please add water to grind again, and repeat this step until the grinding marks of #1000 are completely removed.
＊ After grinding with #2000 diamond pad, the surface feels finer than that of #1000, and it will have a little reflection from the side.
4. Polishing and brightening - dust marble polishing powder, and use white polishing scouring pad for polishing
(1) Dust the polishing powder on the stone surface to be polished (reference dosage: every 30 cm x 30 cm, use 1 level tablespoon of powder)
(2) First add a small amount of water to the polishing powder, then use a white scouring pad to stir the polishing powder until it becomes thick.
(3) Use a polisher, press and stick the white scouring pad to the Velcro drive disc, set and fix the speed at the lowest speed “1”,and turn on the power to start polishing.
(4) Keep the polishing liquid thick and milky during polishing. If it is too thick, add some water as appropriate; if it is too thin, add some powder as appropriate.
(5) During the polishing process, the polishing liquid can be scraped off at any time to observe the brightness of the surface. If the brightness does not meet the requirements, increase the polishing time.
(6) After polishing, wipe off excess polishing powder. Then with clean water, use the polisher with another clean white scouring pad to clean the surface. Finally, wipe the surface dry.
Features of XShine Marble Polishing Powder
1. Suitable for all kinds of marbles
2. Quick brightening, glossy and fine polishing surface
3. Not easy to damage stone, no pungent sour!Suitable for home DIY.
4. pH Value: 2~3
【Cautions】
1. Before using the polisher, please read the attached safety manual carefully.
2. If you need to handle stones other than marble, please purchase other suitable polishing materials.
3. Please wear rubber gloves and a mask when using the polishing powder. When dusting the polishing powder, please avoid excessive movement that may cause the powder to fly.
4. Keep out of reach of children. Polishing powder must not be swallowed.Please avoid the polishing powder to contact with eyes. If it contacts with eyes, please rinse the eyes with plenty of water and if necessary, seek medical treatment as soon as possible.
5. Before use, please test it in an inconspicuous area. If you have any questions during the test, please contact us for discussion.
