Description
The power supply of PE-925VS variable-speed polisher is single-phase 110V 60Hz.
No need for chemical cleaners! Just clean water is all it takes to clean and polish your stone facade!
Easy and simple, restore the brightness perfectly!
Application
Cleaning, polishing and beauty care of walls and vertical surfaces of natural bright marble and granite, such as exterior walls, TV walls, stair hall walls, and bath tub facades.
*Not applicable: scratches, corrosion and color stain on the stone surface
Set Specifications/Prices
- 3-inch Machine Kit (Velcro drive disk, Diamond Impregnated Cleaning and Polishing Pad are all 3 inches): NT 2920
- 4-inch Machine Kit (Velcro drive disk, Diamond Impregnated Cleaning and Polishing Pad are all 4 inches): NT 3020
Set Contents
1. PE-925VS Variable Speed Electric Machine: 1 unit
Depending on the selected kit, it comes with either a 3-inch or 4-inch Velcro drive disk
*Please refer to product images for machine specifications.*
2. Blue Diamond Impregnated Cleaning and Polishing Pad: 1 piece
3. Green Diamond Impregnated Cleaning and Polishing Pad: 1 piece
4. Carnauba Wax - for vertical stone surfaces: 1 can
150ML,includes one wax applicator sponge and one ultra-fine microfiber cloth.
5. Ultrasoft Quick Drying Stone Cleaning Towel: 1 piece
6. 350ML Spray Bottle: 1 unit
7. Stone Surface Squeegee: 1 piece
How to Use
【Preparations Before Work】
- Protect the areas that do not need to be ground and polished against splashes (it is recommended to use pre-taped masking film).
- Install the horizontal grip on the machine and use it stably. Install the Velcro drive disc on the tooth shaft of the polisher, and turn the polisher’s speed knob to “1” to start.
【Work Flow】
STEP 1 Removal of stains-use blue diamond-impregnated scouring pad
(1) Press and stick the blue diamond-impregnated scouring pad to the Velcro drive disc, with the blue grinding side facing outward.
(2) Appropriately and evenly spray water on the stone surface.
(3) Start the machine for cleaning. Slowly move back and forth from left to right to clean the surface until the stain is removed.When cleaning, the blue diamond-impregnated scouring pad must be completely flat against the stone wall to avoid incomplete cleaning caused by inclination.If the water is insufficient, please timely spray water to humidify the surface.
(4) After cleaning, scrape off the remaining water on the surface with a water scraper, and observe whether the stain is removed. If there is still stain, please clean the surface again until the stain is completely removed.
＊Stains caused by color stain, and surface corrosion caused by acid and alkali cannot be removed.
STEP 2 Fine grinding and polishing - use green diamond-impregnated scouring pad
(1) Press and stick the green diamond-impregnated scouring pad to the Velcro drive disc, with the green grinding side facing outward.
(2) Similarly, spray water on the stone surface for polishing. When polishing, the green diamond-impregnated scouring pad must be completely flat against the stone wall to avoid incomplete polishing caused by inclination. If the water is insufficient, please timely spray water to humidify the surface.
(3) After polishing, scrape off the remaining water on the surface with a water scraper, and observe whether the surface is evenly polished for brightness. If there is an area that has not been polished,please polish it again. Finally, scrape off the water, and use a stone cleaning cloth to wipe off the remaining water on the surface until it is completely dry.
STEP 3 Waxing for beauty care - use vertical stone surfaces Carnauba Wax
(1) Wait until the stone surface is completely dry before waxing.
(2) Squeeze an appropriate amount of vertical stone surfaces Carnauba Wax onto the outer edge of the yellow waxing sponge. Press and stick it in the middle of the Velcro drive disc, start waxing, and spread the wax evenly. If there is a residual wax film that is difficult to smooth out with the machine, please wipe it with the attached white de-waxing cloth.
(3) The waxed surface will have good smoothness and water repellency, and can also resist dirt. Depending on the surface condition,waxing should be carried out regularly to keep the stone bright and maintain a good water-repellent effect.
【Cautions】
(1) This kit is only suitable for cleaning and maintenance of natural polished marble and granite facade, and is not suitable for other building materials.
(2) This kit is intended for the cleaning and maintenance of heavily soiled stone surfaces, and is not suitable for repairing acid etching, scratches, or color defects.
(3) Before using the PE-925VS machine, please carefully read the included safety manual. PE-925VS is a lightweight cleaning and waxing machine and is not suitable for grinding and polishing operations with diamond abrasive pads and polishing powders. If such operations are required, please use the PE-926VS or PE-927VS variable speed grinding machines.
(4) The “Carnauba Wax - for vertical stone surfaces” should not be used on floors.
(5) Avoid contact with eyes when using the “Carnauba Wax - for vertical stone surfaces”. In case of eye contact, rinse with plenty of water and seek medical attention if necessary. Do not swallow, and keep out of reach of children.
(6) Before using on a large area, please conduct a test in an inconspicuous area. If you have any questions during the testing process, please contact us for discussion.
