Description
Application
1. Remove oil stains from materials such as marble, granite, sandstone, slate, concrete, ceramics, and polished bricks. (e.g., cooking oil, machine oil, butter, tape residue, etc.)
2. Not suitable for removing water-based stains, rust stains, mineral discolorations.
#Important: Please read the "Cautions" section carefully before purchasing.
Features
1. Removes oil stains that have penetrated the surfaces of applicable materials, restoring the original surface color.
2. Turns into a paste after mixing, convenient for use on vertical and flat surfaces.
3. Natural citrus scent, neutral and does not harm the materials.
4. Leaves no residue on the surface after use.
5. Sealed in an aluminum foil bag inside the can to ensure product quality and extend shelf life.
Package Contents
1. Oil Stain Remover 250g/can
2. Disposable PVC gloves x 1 pair
3. Individually packaged mask x 1
4. Mixing stick x 2
How to Use
1. Use the included mixing stick to evenly mix the oil remover until it becomes a thick, white paste.
2. Apply the oil remover to the oil-stained surface with a thickness of approximately 2-4mm, covering an area greater than 2cm beyond the oil stain area.
3. Completely cover the oil remover with plastic wrap (use low-adhesive tape around the edges, avoid regular tape to prevent adhesive residue from seeping in).
4. Allow it to sit for 12-24 hours to let the oil remover penetrate and thoroughly break down the oil stain. Ensure good ventilation during this process.
5. Remove the plastic wrap and let the oil remover completely dry and turn into a powder, then clean it off.
6. If there are still residual oil stains, repeat the process. Some particularly stubborn or old oil stains may only be lightened but not completely removed.
7. Finally, wipe clean with a clean damp cloth.
Cautions
1. This product is suitable for removing oil stains from surfaces of materials such as marble, granite, and stone, slate, concrete, ceramics, and polished bricks.
2. This product is not a quick-acting formula. The time required to improve or remove oil stains using this product may vary depending on factors such as the type of contaminant, the duration of penetration, and the different porosity of various types of stone. Some particularly stubborn or old oil stains may require multiple applications and may only be lightened, not completely removed.
3. Types of stains that are not suitable: water-based stains, rust stains, mineral discolorations.
4. When applying, please wear a mask and rubber gloves. If skin comes into contact with the product accidentally, it may cause a tingling sensation but will not harm the skin. Rinse with plenty of water and the sensation should gradually subside after about 30 minutes.
5. Please test the product's effectiveness in a small area before applying it to the entire surface.
6. This product is flammable; there should be no open flames during application, and the area should be well-ventilated.
7. Store in a cool, dry, and well-ventilated place.
8. After opening, please use it as soon as possible.
9. Keep out of reach of children. Do not ingest. If ingested accidentally, seek medical attention promptly.
Shelf Life
- Unopened: 2 years
- Opened: 2 months (If the product's cleaning effect remains unchanged after the expiration date, it can still be used.)
